Specialty Ladders

1-800-403-7024
CALL FOR ASSISTANCE

Orchard Ladders

  • Manufactured by Stokes Ladders
  • Full 3" stepping with non-skid design.
  • Extra strong extruded side rail.
  • Solid aircraft rivets throughout.
  • Bright red "no higher" safety reminder step.
  • Formed angle braces for added strength.
  • Anodized shoulder pad for comfort at balance point.
  • Sturdy 3rd leg unit pivots on wear-proof steel bushings.
  • Heavy-duty 3/16? pivot bracket on 3rd leg.
  • Wide base for stability.
  • Reinforced bottom steps for greater strength.
  • Loose-fitting third leg cradle reduces wear on 3rd leg





Truck Access Ladder

  • Deep steps provide easy access in tight quarters.
  • Square steel tubing for durability and long service life.
  • Platform height is designed to reduce tripping hazards.
  • Walk-through back is standard.
  • 4” x 4” skid pads on front provide a sturdy base.
  • 8” Tilt-N-Roll wheels allow easy one-person repositioning. 
  • 300 lb. capacity.

TAL-2 Steel Truck Access Ladder

MODEL HEIGHT TO
PLATFORM		 PLATFORM
SIZE		 STEP DEPTH STEP WIDTH LBS
TAL-2 45" 24" X 28" 7" 24"  121

TAL-4 Steel Truck Access Ladder

MODEL HEIGHT TO
PLATFORM		 PLATFORM
SIZE		 STEP DEPTH STEP WIDTH LBS
TAL-4 45" 24" X 30.5" 11 3/4" 24"  160

 

Tank Inspection Ladders

  • Designed for internal tank inspection and cleaning.
  • Aluminum construction with replaceable 1-1/4” serrated rungs.
  • 12” wide (13-5/8” over shoes) to facilitate entry into tank cars through narrow access hatches.
  • Swivel safety shoes standard.
  • Type 1A, 300lb. Duty ranting

Folding Inspection Ladders

  • Designed for use in closed-in areas with extremely narrow access routes; i.e., inside storage tanks, manholes, water treatment plants, etc.
  • Folds to 5-1/4” for easy maneuverability.
  • Aluminum marine grade alloy construction.
  • Safety shoes standard.
  • Type 1A, 300lb. Duty rating

MODEL HEIGHT WIDTH LBS
TIL-08 8' 12" 12
TIL-10 10' 12" 15
TIL-12 12' 12"  18
TIL-14 14' 12" 21
TIL-16 16' 12" 24
TIL-18 18' 12" 27
TIL-20 20' 12" 30
LENGTH  WIDTH
MODEL OPEN CLOSED  OPEN
 CLOSED LBS
FIL-08 8' 8' 11" 15 1/2" 5 1/4" 14
FIL-10 10' 11' 2" 15 1/2" 5 1/4" 16
FIL-12 12' 13' 4" 15 1/2" 5 1/4" 19
FIL-14 14' 15' 7" 15 1/2" 5 1/4" 23

Max Stack Ladders

  • Sections can be combined to produce the desired length; ladder must be laterally supported every 30’.
  • All aluminum construction reduces weight and resists corrosion.
  • Each ladder section has a male and a female end to enable easy connection utilizing wing nuts and thumb screws.
  • 16” wide to facilitate ease of handling and access through hatches and manholes.
  • Bottom section requires heavy-duty aluminum swivel safety shoes with thick rubber tread for added slip-resistance.

CALL FOR PRICE
 

Heavy-Duty Shelf Ladders

  • 1-1/2” wide angle aluminum feet with rubber treads.
  • 4” deep slip-resistant ribbed steps.
  • Tool holes in top cap for added convenience.
  • All parts replaceable; ladders can be repaired at your facility
  • Each step braced front and back 4 gussets and 16 rivets per step.
  • Tapered for increased stability.
  • Special padded tops for use against tanks sides optional

Aluminum

BASE
MODEL HEIGHT WIDTH LBS
S100H-03 3' 21" 10
S100H-04 4' 22" 10
S100H-05 5' 24" 13
S100H-06 6' 25" 14
S100H-07 7' 26" 18
S100H-08 8' 28" 22
S100H-09 9' 29" 24
S100H-10 10' 31" 28
S100H-11 11' 32" 30
S100H-12 12' 33" 34
S100H-13 13' 35" 37
S100H-14 14' 36" 40
S100H-15 15' 38" 43
S100H-16 16' 39" 48
S100H-17 17' 41" 51
S100H-18 18' 42" 54
S100H-19 19' 43" 60
S100H-20 20' 45" 63

 
Fiberglass
CALL FOR PRICE
 

Security Access Ladders

  • Locking Device secures the ladder from unauthorized use.
  • Opens to 12-1/2” wide when in use, and stores to only 2-1/2” wide in the closed, locked position.
  • Aluminum construction facilitates use either indoors or out without worry of corrosion.
  • Available with top (TP) or bottom (BP) locking device. Please specify when ordering. Padlock not  included.

MODEL OPEN
LENGTH		 HEIGHT TO
TOP RUNG		 LBS
SAL-08 8' 11" 6' 10" 12
SAL-10 11' 2" 10' 14
SAL-12 13' 4" 11' 3" 17
SAL-14 15' 7" 13' 6" 21
SAL-16 17' 10" 15' 9" 25
SAL-24 25' 8" 23' 8" 26